|
The new QuickFinder® Clipper is a nail clipper for dogs (up to 75 lbs), cats
and small animals, and birds, that utilizes QuickSensor Technology that
senses your pet's quick and gives visual cues as to when it is safe and when
it is not safe to begin clipping. Red-Yellow-Green. Green means Go! It is
fast, safe and easy to use.
Our patented design utilizes sensor technology to detect nail differences
between the live blood of your pet's quick, and the dead skin of the nail
and claw. QuickSensor senses with a circuit-board precision, when it is safe
to cut, when to be cautious, and when it is not safe to cut.
How it Works:
 |
QuickFinder® Clipper works on amazing Quicksensor
technology that senses your pet's quick and gives you visual cues as
to when it is safe and when it is not safe to begin clipping.
The patented QuickSensor (fig. 1) detects the changes in frequencies
in your pet’s nail due to sensing of the blood vessels and nerve
endings in the quick. When the blood vessels or nerve endings are
detected, the red light will illuminate.
|
As you move the QuickFinder®
slowly toward the tip of the nail, the light will change to yellow
(caution) and finally to green - safe to cut. (Fig. 2)
The QuickFinder® Clipper is battery operated and includes two AAA
batteries.
Simple, safe, and effective! Clipping your pet's nails has never
been easier and more comfortable for your pet! |
 |
How to use:
Step 1: Power Up: To power on the unit and keep powered up slightly squeeze
handles together until red light only is illuminated (continue to keep
handles slightly squeezed together to keep power on). If all lights
illuminate and remain on, there is insufficient power and batteries must be
replaced. If green light stays on, turn unit off by releasing handles, wait
two seconds for unit to reset and restart power up phase again. Once red
light stays illuminated unit has sufficient battery power and is ready for
operation.
Step 2: With unit powered up (red light on), insert nail
into fixed blade hole from under side of clipper. Keep nail at 90º angle and
against sensor side of the fixed blade hole. Move cutting blades toward base
of nail far enough that quick in the nail will be detected for the first
time. The red light will flicker and remain on. This sets the sensor to the
quick in the nail. Note that the nail should continually be on the sensor
side of the hole during sensing for sensing to occur.
Step 3: Maintaining power to unit, move cutting blades
back towards nail tip away from nail base. The yellow light may briefly
illuminate as blade and sensor approaches nail without quick.
Continue moving cutting blades outward until green light illuminates
indicating a safe cut. It is not safe to clip when yellow or red lights are
on.
Step 4: While maintaining position and angle (90º) of clipper, squeeze
handles together in firm swift motion to avoid crushing nail. It is normal
for green light to turn off at end of clipping action after blade has cut
through nail.
If red light stays on, power off device and restart clipping process (Step
1).
The QuickFinder® will automatically turn off in open position (Handles not
depressed).
QuickFinder Safety Nail Clipper has
been the recipient of the 2007 CAT FANCY Magazine Editors' Choice Award. The
recognition accompanies those previously awarded the QuickFinder: Pet
Product News International 2007 Editors' Choice Award, SuperZoo 2007 New
Product of the Year Award, and DOG FANCY magazine 2007 Editors' Choice
Award.
Click here for the QuickFinder Most
Frequently Asked Questions
Available in 3 sizes:
Medium Dogs
(MI 3478) $ 27.96
Small Dogs
(MI 3482) $ 27.96
Cats & Small Animals
(MI 3483) $ 27.96
|
