Summit ProtectorLok Mats

Since 1985, Protector Mats have been the recognized leader in heavy duty matting for large and small animals alike. Ten years later we brought the interlocking Mighty Lite Mat to market for those people needing light weight mats. Indeed, the market was crying for “lightweight” mats, but as the response from equestrians clearly showed, “interlocking capability” was a smash hit too.

ProtectorLoks were introduced in early 1997, and their popularity is growing by leaps and bounds.

The reasons are clear:

Because the interlocks fit very tightly (a hammer is usually required to knock them together), the amount of water or urine that can seep through a seam is absolutely minimized.
While interlocks provide a “virtual one-piece” stall floor, the individual mats that weigh 100 pounds each can be adequately handled by one or two people, where larger pieces or rolls of rubber can be more difficult to wrangle.
Interlocked mats can be laid well within the walls of a stall and do not have to be trimmed to fit wall-to-wall, as is needed with straight- edged mats.
ProtectorLok mats don’t shift or separate, and horses can’t get them up.
Their ease of assembly and use appeals to many people who don’t trust their “handyman skills.”

Use ProtectorLoks to build a complete aisle floor. Flip them over and use them as a pad around a phantom mare. They won’t shift, and the grooves will give the stallion greater traction. Use ProtectorLoks in shoeing areas, grooming areas, wash racks, run-in sheds.. .you name it. They hold themselves in place and don’t need surrounding walls to contain them. Take a closer look at ProtectorLoks. They might be exactly what you’re looking for.

Features:

Cut stall cleaning time.
Save on bedding expenditures. ProtectorLoks will pay for themselves in the first year.
Easy to install, and once in place won’t move or shift.
Guaranteed not to curl or tear.
Reduce airborne dust.
Reduce the risk of thrush by eliminating bacteria-laden wet spots.
Provide excellent cushioning for animal comfort.
10 year wear-and-tear warranty.

Surface Texture

Product Specifications:

Color: Black
Profile: Roto Etch (top); Aerobi Groove (bottom)
Size: 47.5” x 70.82” x 11/16"
Net floor coverage per mat: 22.25 ft.
Weight: 98 lbs. (44 kg)

To determine how many mats you will need, measure the area you want to cover, then multiply the length in feet times the width in feet, and divide the result by 22.25.

Layout details for common stall sizes are at the bottom of this page

For Warehouse Pick-up

Qty 1 - 99 - $ 57.90 each
Qty 100 + - $ 55.90 each

Select the warehouse below, enter the quantity and click the "Add to Cart" Button!

When purchasing on-line for warehouse pick-up, we will process the order, fax a copy to the warehouse, and call or email you with pick-up instructions.

Click Here for Warehouse List & Details

The warehouses are public warehouses the manufacture of the mats rents floor space in. The warehouse employees cannot take orders for the mats, or answer questions on the mats. Note: There is a $35 Pick-up fee added to your order for warehouse pick-up.

Product ID - SFP 538

For Motor Freight Delivery

Qty 1 - 99 - $57.90 each + Freight
Qty 100 + - $55.90 each + Freight

Select your state below to see freight charges and click the "GO!" Button!

Click here for Important
Delivery Information

Placement of an order constitutes agreement of our pick-up or delivery acceptance terms at the link above. Please read before completing your order

Note: The driver's obligation is limited to getting the mats only to the rear of the truck or onto the ground.

We will ask the Carrier to call you for a Delivery Appointment. This will automatically delay delivery 24 hrs to establish the appointment. Discuss your needs and/or limitations, if any, with the dispatcher calling for the appointment. If you do not return a dispatcher's call, expect a delay in your delivery.

Product ID - SFP 538

Accessories & Options

Interlocking
Rubber Corners (flat)

Rubber Corner Piece with straight edges. After interlocking, they extend the floor mats 4" on any side to which they are connected.

(SFP 532) - $7.50 set of 4
Black Only - Ships by UPS

Interlocking Rubber
24" Edge Strips (flat)

Rubber Edge Piece with straight edges. After interlocking, they extend the floor mats 4" on any side to which they are connected. 5.5" x 24" x 11/16"

(SFP 530) - $5.50 each
Black Only - Ships by UPS

Interlocking
Rubber Corners (beveled edge)

Rubber Corner Piece with beveled edges. After interlocking, they extend the floor mats 4" on any side to which they are connected.

(SFP 534) - $11.50 set of 4
Black Only - Ships by UPS

Interlocking Rubber
24" Edge Strips (beveled edge)

Rubber Edge Piece with beveled edges. After interlocking, they extend the floor mats 4" on any side to which they are connected. 5.5" x 24" x 11/16"

(SFP 531) - $7.50 each
Black Only - Ships by UPS

Interlocking 2' x 2' Center
Mat for 10' x 10' Stall
(See 10x10 configuration below)

(SFP 513) - $15.50
Black Only - Ships by UPS

Interlocking EVA Material
Finishing Kit's for
10' x 12' or 12' x 12' areas

To complete the installation with straight edges on all outside edges, Summit provides a "Finishing Kit" with corner pieces and 2 foot long strips with interlocking tabs on one side and a straight edge on the other side. The finishing Kits have a flat finish. They are available with straight edges (not beveled) only. One finishing kit will complete a 12 x 12 area.

One finishing kit will complete a
10 x 12 or 12 x 12 area.

(SFP 543) - $ 41.95 each kit
plus UPS Shipping

The Kits will be shipped to you by UPS. They are not stocked at the warehouses.

NOTE: The Finishing Kits are not the same material or texture as the ProtectorLok mats. They are made of the same material as the MightyLite mats (EVA Closed Cell Foam).

Common Stall Sizes

	10' x 10 Foot Configuration The kit consists of 4 each 4' x 6' mats, 1 each 2' x 2' mat and 1 each finishing kit to complete the outside edge. Total shipping weight per kit is 432 pounds. The 2' x 2' tile and finishing kits are shipped to you by UPS. They are not stocked at the warehouses. NOTE: The Finishing Kits are not the same material or texture as the ProtectorLok mats. They are made of the same material as the MightyLite mats (EVA Closed Cell Foam).

	10' x 12' Configuration The kit consists of 5 each 4' x 6' mats and 1 each finishing kit to complete the outside edge. Total shipping weight per kit is 516 pounds. The finishing kits are shipped by UPS. They are not stocked at the warehouses. NOTE: The Finishing Kits are not the same material or texture as the ProtectorLok mats. They are made of the same material as the MightyLite mats (EVA Closed Cell Foam).

	12' x 12' Configuration The kit consists of 6 each 4' x 6' mats and 1 each finishing kit to complete the outside edge. Total shipping weight per kit is 616 pounds. The finishing kits are shipped by UPS. They are not stocked at the warehouses. NOTE: The Finishing Kits are not the same material or texture as the ProtectorLok mats. They are made of the same material as the MightyLite mats (EVA Closed Cell Foam).

More Information

The ABC's of Barn and Trailer Flooring - Stall Mats	Frequently Asked Questions on Stall Mats
Installation Instructions & Tips	Warehouse Pick-up Locations
Why Buy Summit Mats?	Other Uses for Rubber Mats
Delivery and Warehouse Pick-up Information

ProtectorLok Rubber Mats

For Warehouse Pick-up

For Motor Freight Delivery

Interlocking Rubber Corners (flat)

Interlocking Rubber 24" Edge Strips (flat)

Interlocking Rubber Corners (beveled edge)

Interlocking Rubber 24" Edge Strips (beveled edge)

Interlocking EVA Material Finishing Kit's for 10' x 12' or 12' x 12' areas

Common Stall Sizes

10' x 10 Foot Configuration

10' x 12' Configuration

12' x 12' Configuration

Interlocking
Rubber Corners (flat)

Interlocking Rubber
24" Edge Strips (flat)

Interlocking
Rubber Corners (beveled edge)

Interlocking Rubber
24" Edge Strips (beveled edge)

Interlocking EVA Material
Finishing Kit's for
10' x 12' or 12' x 12' areas