Correction Mouth Bits

Correction Mouth Bits -1

Abetta Correction Mouth Bits

The correction mouth is one of the most popular mouthpieces in use today. The three-piece loose-jaw design allows every aspect of the horse to be controlled at once or each side can be lifted and controlled independently. The medium high port contact the palate while pressure on the tongue and bars adds authority. From green to finished, this bit has tremendous application.

See more Correction Mouth Bitts - Page 2

	Aluminum Correction Bit The correction mouth is easily one of the most versatile bits. The medium high port works off roof of the mouth while bar and tongue pressure adds authority. Copper bars keep the mouth wet and responsive. The longer shanks demand attention and are turned back for more signal. Aluminum lightens the weight of the bit and enhances performance. Shanks: 8", Aluminum shanks. Mouth: 5", "Sweet-iron" correction mouth with copper bars. (AC 16115) - $38.90 (Normally ships in 2-5 days) Qty:
	Colt Correction Bit The correction mouth has a medium high port that works off roof of the mouth while bar and tongue pressure adds authority. Copper bars keep the mouth wet and responsive. The shanks are a little longer than the Tom Thumb and slightly turned back for more signal. Hand engraved Silver overlay adds a professional look. Shanks: 7", Stainless steel shanks. Mouth: 5", "Sweet-iron" Correction mouth with copper bars. Trim: Hand engraved Silver overlay. (AC 15402-71) - $39.90 (Normally ships in 2-5 days) Qty:
	Colt Correction Bit The correction mouth has a medium high port that works off roof of the mouth while bar and tongue pressure adds authority. Copper bar keep the mouth wet and responsive. The shanks are a little longer than the Tom Thumb and slightly turned back for more signal. Shanks: 7", Stainless steel shanks. Mouth: 5", "Sweet-iron" Correction mouth with copper bars. (AC 15402-7) - $39.90 (Normally ships in 2-5 days) Qty:
	Correction Cavalry Shank The Cavalry shank is for the more experienced older horse. The shanks are longer and heavier with increased leverage for a faster signal. The medium high port works off roof of the mouth while bar and tongue pressure adds authority. Copper ' bars keep the mouth wet and responsive. Shanks: 8-1/4", Blued or Stainless Cavalry shank. Mouth: 5", "Sweet-iron" correction with copper bars. Blued Steel (AC 16033-7) - $39.90 (Normally ships in 2-5 days) Qty: Stainless Steel (AC 16035-7) - $39.90 (Normally ships in 2-5 days) Qty:
	Cavalry Shank Correction This long-shanked bit was developed by the U.S. Army for the more experienced, older horse with heavier shanks and increased leverage for a faster signal. The correction port works off the roof of the mouth while bar and tongue pressure adds authority. Hand engraved Silver trim adds a professional look. Shanks: 8-1/4", Stainless steel shanks. Mouth: 5", "Sweet-iron" correction with copper bars. Trim: Hand engraved Silver overlay. (AC 16035-71) - $48.90 (Normally ships in 2-5 days) Qty:
	Colt Correction Bit The correction mouth is extremely versatile with a medium high port that works off of the roof of the mouth while bar and tongue pressure adds authority. Copper keeps the mouth wet and responsive. The shanks are extra long for more leverage and slightly turned back for added signal. Shanks: 9", Stainless steel shanks. Mouth: 5", Copper correction mouth. (AC 15584) - $39.90 (Normally ships in 2-5 days) Qty:
	Correction Bushing Bit The correction mouth is easily one of the most versatile bits. The medium high port works off roof of the mouth while bar and tongue pressure adds authority. Copper bars keep the mouth wet and responsive. The longer shanks demand attention and are turned back for more signal. Shanks: 8", Stainless steel with brass bushings for a tight, pinchless joint. Mouth: 5", "Sweet-iron" correction mouth with copper bars. (AC 15207-7) - $39.90 (Normally ships in 2-5 days) Qty:
	Correction Bushing Bit The correction mouth is easily one of the most versatile bits. The medium high port works off roof of the mouth while bar and ' tongue pressure adds authority. Copper bars keep the mouth wet and responsive. The light or low-leverage shank is excellent for colts following the ring snaffle. Shanks: 6", Stainless steel with brass bushings for a tight, pinchless joint. Mouth: 5", "Sweet-iron" correction mouth with copper bars. (AC 15205-7) - $39.90 (Normally ships in 2-5 days) Qty:
	Correction Bit This short shank bit has excellent balance. It is a useful bit for young horses moving from the ring snaffle to medium curb action. The correction mouth has a medium high port that works off roof of the mouth while bar and tongue pressure adds authority. Copper rings keep the mouth wet and responsive. Shanks: 4-1/2", Stainless steel shanks. Mouth: 5", Correction mouth with copper rings. (AC 15513-5) - $39.90 (Normally ships in 2-5 days) Qty:
	Colt Correction Bit The correction mouth has a medium high port that works off roof of the mouth while bar and tongue pressure adds authority. Copper keeps the mouth wet and responsive. The shanks are a little longer than the Tom Thumb and slightly turned back for more signal. Shanks: 7-1/4", Stainless steel shanks. Mouth: 5", Copper correction mouth. (AC 15583-4) - $42.90 (Normally ships in 2-5 days) Qty:
	Correction Bit This short shank bit has excellent balance. It is a useful bit for young horses moving from the ring snaffle to medium curb action. The correction mouth is easily one of the most versatile bits. The medium high port works off the roof of the mouth while bar and tongue pressure adds authority. Copper bars keep the mouth wet and responsive. Shanks: 5-3/4", Stainless steel shanks. Mouth: 5", Copper correction mouth. (AC 15583-5) - $44.90 (Normally ships in 2-5 days) Qty:
	Colt Correction Bit This bit is an ideal step up from a ring snaffle during the training process used with young performance horses. It offers a loose shank sidepull with large rein rings for lighter contact. The correction mouth has a medium high port that works off roof of the mouth while bar and tongue pressure adds authority. Copper wire keeps the mouth wet and responsive. Shanks: 5-1/2", Stainless steel shanks. Mouth: 5", Correction mouth with copper wire. (AC 15293-1) - $26.90 (Normally ships in 2-5 days) Qty:
	Colt Correction Bit This bit is an ideal step up from a ring snaffle during the training process used with young performance horses. It offers a loose shank sidepull with large rein rings for lighter contact. The correction mouth has a medium high port that works off roof of the mouth while bar and tongue pressure adds authority. Copper wire keeps the mouth wet and responsive. Shanks: 5-1/2", Blued steel shanks. Mouth: 5", Correction mouth with copper wire. (AC 15293) - $28.90 (Normally ships in 2-5 days) Qty:
	Cavalry Correction Bit The Cavalry shank is designed for older more experienced horses. The long shanks are heavier with increased leverage for a faster signal. The correction mouth has a medium high port that works off the roof of the mouth while bar and tongue pressure adds authority. Copper rings keep the mouth wet and responsive while enhancing sensitivity and feel. Shanks: 6-3/4", Stainless steel Cavalry shanks. Mouth: 5", Correction mouth with copper rings. (AC 15683) - $48.90 (Normally ships in 2-5 days) Qty:
	Cavalry Correction Bit The Cavalry shank is designed for older more experienced horses. The long shanks are heavier with increased leverage for a faster signal. The correction mouth has a medium high port that works off the roof of the mouth while bar and tongue pressure adds authority. Copper rings keep the mouth wet and responsive while enhancing sensitivity and feel. Shanks: 8-1/2", Stainless steel Cavalry shanks. Mouth: 5", Correction mouth with copper rings. (AC 15583-2) - $48.90 (Normally ships in 2-5 days) Qty:
	Correction Training Bit The correction mouth has a medium high port that works off the roof of the mouth while bar and tongue pressure adds authority. Copper bars keep the mouth wet and responsive. This training bit has both shanks and lees for multiple reins in various training applications. Shanks: 8", Stainless steel shanks. Mouth 5", "Sweet-iron" correction mouth with copper bars. (AC 15672-1) - $34.90 (Normally ships in 2-5 days) Qty:
	Correction Training Bit The correction mouth has a medium high port that works off the roof of the mouth while bar and tongue pressure adds authority. Copper keeps the mouth wet and responsive. This training bit has both shanks and dees for multiple reins in various training applications. Shanks: 9", Stainless steel shanks. Mouth: 5", Copper correction mouth. (AC 15688) - $34.90 (Normally ships in 2-5 days) Qty: