 |
Mullen Training Bit
Proven by trainers and pleasure riders, the loose shanks allow a
side pull action with dees for multiple reins in various
training applications. The thick mullen or arch port mouth is
gentle with no palate contact and some tongue relief.
"Sweet-iron" keeps the mouth wet and responsive.
Shanks: 7-3/4", Stainless steel with dees.
Mouth: 5" x 1/2", "Sweet-iron" mullen. (AC 56851) - $39.90
(Normally ships in 2-5 days)
|
 |
Mullen Mouth Bit
A lightweight, mild and effective bit that is a good tool for
moving a colt from a snaffle or gag bit to a curb bit. The thick
mullen or arch port mouth is gentle with no palate contact and
some tongue relief. Copper keeps the mouth wet and responsive.
Shanks: 8", Stainless steel with braided rope trim.
Mouth: 5", Copper mullen. (AC 15791-3) - $29.90
(Normally ships in 2-5 days)
|
 |
Mullen Mouth Bit
A lightweight, mild and effective bit that is a good tool for
moving a colt from a snaffle or gag bit to a curb bit. The
mullen or arch port mouth is gentle with no palate contact and
some tongue relief. Copper keeps the mouth wet and responsive.
Shanks: 6-3/4", Stainless steel.
Mouth: 5", Copper mullen. (AC 15687-5) - $41.90
(Normally ships in 2-5 days)
|
 |
Mullen Mouth Bit
A lightweight effective bit that is a good tool for moving a
colt from a snaffle or gag bit to a curb bit. The mullen mouth
has no palate contact but extensive bar and tongue pressure.
Shanks: 7", Stainless steel.
Mouth: 5", Stainless steel mullen. (AC 15598) - $29.90
(Normally ships in 2-5 days)
|
 |
Mullen Mouth Bit
Designed with a unique purchase (the distance between the port
and the top ring) that places the curb in a new area and helps
eliminate pinching at the corners of the mouth. The mullen mouth
has no palate contact with some tongue relief. Copper keeps the
mouth wet and responsive.
Shanks: 9", Stainless steel.
Mouth: 5", Stainless steel mullen. (AC 15719) - $37.90
(Normally ships in 2-5 days)
|
 |
Mullen Colt Bit
This low-leverage bit with a hollow copper mouthpiece is
excellent for handling young horses in front of cattle or
starting colts into a curb bit. The rein loops are large to
allow the reins to slip for lighter contact. Copper keeps the
mouth wet and responsive.
Shanks: 4-3/4", Stainless steel.
Mouth: 5" x 1/2", Copper mullen. (AC 15633-1) - $33.90
(Normally ships in 2-5 days)
|
 |
Mullen Colt Bit
This low-leverage bit with a hollow a "Sweet-iron" mouth is
excellent for handling young horses in front of cattle or
starting colts into a curb bit. The rein loops are large to
allow the reins to slip for lighter contact. "Sweet-iron" keeps
the mouth wet and responsive.
Shanks: 4-3/4", Stainless steel.
Mouth: 5" x 1/2", "Sweet-iron" mullen. (AC 15633) - $25.90
(Normally ships in 2-5 days)
|
 |
California Shank Mullen
West Coast style cheeks feature a high cheek to shank ratio that
reduces signal and demands an immediate response. The Mulllen
mouth is gentle with no palate contact and some tongue relief.
Hand engraved Silver overlay adds a professional look.
Shanks: 8-1/2", Stainless steel.
Mouth: 5", Stainless steel Mullen.
Trim: Hand engraved Silver overlay.
(AC 15425-3) - $79.90
(Normally ships in 2-5 days)
|
 |
Mullen Training Bit
The pinchless center swivel allows the rider to control the
shanks independently of each other. The mullen mouth applies
pressure across the bars and tongue. Copper bars keep the mouth
wet and responsive.
Shanks: 8", Stainless steel with dees.
Mouth: 5", Stainless mullen port with. pinchless center swivel
and copper bars. (AC 16906-0) - $69.90
(Normally ships in 2-5 days)
|
