Larger Image |
Mike Beers Large Chain Mouth
8" Cheeks 5" Mouth
Designed with excellent balance and the leverage needed for
serious competition. The mouth looks
severe when it is actually a comfortable
mouth to pack. Excellent for horses that are high headed when bit pressure is
applied. Helps to break a horse at the poll to get the nose in and head down.
When in competition, this bit will help lift the shoulders and lower the rear
end for stronger turns and powerful stops.
(REP 532) - $ 72.40
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers Ported Chain Mouth
8" Cheeks 5" Mouth
Excellent balance and leverage for serious competition.
Mouthpiece adds some tongue relief and incorporates a slight amount of palate
pressure for a different cue to stop. Plus, a little more bar pressure than a
chain for harder mouthed horses. Great for horses that want to run into your
hand against the bit. Port height is 1-1/4"
(REP 534) - $ 76.20
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers High Port Chain Mouth
8" Cheeks 5" Mouth
Excellent balance and leverage for serious competition. This
mouthpiece has lots of tongue relief and good bar pressure for control. Great
for horses that try to run into your hand against the bit. Port height is 2"
(REP 536) - $ 72.60
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers Small Chain Mouth
8" Cheeks 5" Mouth
Excellent balance and leverage. The small chain was added for
schooling horses that are lugging on the bit or stopping on the front end.
(REP 542) - $ 68.80
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers Classic Large Chain
Mouth
8" Cheeks 5" Mouth
Introducing that cowboy look. Excellent balance and the
leverage needed for serious competition. Great for horses that are high headed
when bit pressure is applied. This bit helps to break a horse over at the poll
and get both the nose and head down.
(REP 533) - $ 57.80
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers Classic Ported Chain
Mouth
8" Cheeks 5" Mouth
Introducing that cowboy look. Excellent balance and the
leverage needed for serious competition. This mouthpiece adds some tongue relief
and a slight amount of palate pressure for a cue to stop. Slightly more bar
pressure for harder mouthed horses. Port height is 1-1/4"
(REP 535) - $ 61.70
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers Classic High Port
Chain Mouth
8" Cheeks 5 " Mouth
Introducing that cowboy look. Excellent balance and the
leverage needed for serious competition. This mouth piece adds lots of tongue
relief and slight palate pressure for a cue to stop and more bar pressure. This
bit is for a horse that tries to run into your hand against the bit. Port height
is 2"
(REP 537) - $ 62.80
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers Large Chain Mouth
6" Cheeks 5" Mouth
A lot more than good looks. Starting with a unique no-pinch
headstall ring. Excellent balance for better feel. Medium leverage (tight curb)
to low leverage (loose curb). Can be used from the later training stage,
showing, pleasure, on thru some serious competition. A very comfortable mouth
for a horse and easy to pack. Applies tongue pressure for head set. Will help to
lift front shoulders and get the rear end down.
(REP 552) - $ 66.40
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers Classic Large Chain
Mouth
6" Cheeks 5" Mouth
This bit has that classic look. It has a no pinch headstall
ring and excellent balance. Medium leverage with a tight curb to low leverage
with a loose curb. Can be used from the later training stage, showing, pleasure
or serious competition. The mouthpiece is comfortable for a horse and easy to
pack, it applies tongue pressure for headset and helps to lift the front
shoulders and get the rear end down.
(REP 553) - $ 54.20
(Normally ships in 10-14 days)
|
Larger Image |
6" Mike Beers Ported Chain Mouth
6" Cheeks 5" Mouth
Features a unique no pinch headstall ring. Excellent balance.
Medium leverage (light curb) to low leverage (loose curb). Excellent for later
train ing, showing, pleasure and on thru competition. Mouthpiece uses tongue
pressure for a different cue and adds more bar pressure than a straight
chain for harder mouthed horses. Port height is 1-1/4".
(REP 554) - $ 70.80
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers 6" Wide Port Chain
Mouth
6" Cheeks 5" Mouth
Great looks, excellent balance and a no pinch curb. This bit
has medium leverage. The mouthpiece adds lots of tongue relief and slight palate
pressure to cue a horse to stop. This mouth/shank combination works well on
horses with a good mouth and natural rate. Port height is 2"
(REP 556) - $ 72.40
(Normally ships in 10-14 days)
|
Larger Image |
6" Mike Beers Classic
High
Port Chain Mouth
6" Cheek 5" Mouth
This bit has that classic look. It has a no pinch headstall
ring and excellent balance. Medium leverage with a tight curb. This mouthpiece
has lots of tongue relief and slight palate pressure to cue a horse to stop.
This bit works well on horses with a good mouth and natural rate.
(REP 567) - $ 59.94
(Normally ships in 10-14 days)
|
Larger Image |
6" Mike Beers
Small Sweet
Iron Chain Mouth
6" Cheek 5" Mouth
A really nice low leverage bit that is well balanced and has
good feel and lots of flex. This smaller mouth adds more bite for better
control. This bit will cross over to other events.
(REP 562) - $ 66.50
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers Trainer
5/16"
Small Twisted Sweet Iron Snaffle
8" Cheek 5" Mouth
This bit is very effective in training or schooling horses.
This mouthpiece will soften the corners of the lips and bars and is very
effective for lifting the front end or the shoulders of your horse.
(REP 566) - $ 56.40
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers Pro Heeler
Copper
Roller Bars
7" Cheeks 5" Mouth
This bit excels in the lateral control needed for heeling
steers. It also maintains good vertical control needed to stop or back your
horse. Port height is 1-3/4"
(REP 865) - $ 126.80
(Normally ships in 10-14 days)
|
Larger Image |
Mike Beers Pro Header
Copper
Roller Bars
8-1/2" Cheeks 5" Mouth
This bit excels in the vertical control needed to stop or back
your horse while maintaining the lateral control needed to head a steer. Port
height is 1-3/4"
(REP 868) - $ 161.20
(Normally ships in 10-14 days)
|
