Easyboot Glue-On

How to choose a Boot Style

How To Measure for Boots

The Easyboot Glue-On shell has been developed as a high performance boot and an option for horses in speed and long distance events. The light weight shell has thin walls that allow the boot to stretch and form to the hoof. The end result is a seamless one-to-one fit that resembles a second skin over the hoof. The Easyboot Glue-On is the closest hoof boot option to the barefoot horse-light weight, no hardware and a seamless fit

In order for this boot to work properly, it must fit snugly, the foot must be dry during application and the glue-on process must be carefully followed. Complete application details are available below.

These boots are meant to be disposable, used once or twice and then thrown away. Glue left on the inside of the boot may affect performance. We do not recommend that a boot be left on for more that ten (10) days in a dry environment or five (5) days in a humid environment.

This boot is perfect for the following situations:

Pack trips.
Multi-day rides.
Endurance events.
Competitive trail rides (Most CTR's do not allow boots that come above the coronary band).
Speed events. such as barrel racing.
Any circumstance where the presence of hardware is a concern.

Larger Image

Larger Image

Easyboot Glue-on Details (Click on picture for larger view)


Seamless front with no hardware.	Boot material stretches for a smooth, snug fit.	Easyboot Glue On Tread has been proven to be successful ever all kinds of terrain

Streamlined boot fits below the hairline.		All portions of the shell can be modified or trimmed down by the consumer. The rear of the shell can be lowered or removed to accommodate horses with low heels. the glue.

Easyboot Glue-on Size Chart - See Fitting Details

Size	Width in mm	Width in mm
00	96-99mm	106-109mm
00.5	100-103mm	110-113mm
0	104-107mm	114-117mm
0.5	108-111mm	118-121mm
1	112-115mm	122-125mm
1.5	116-119mm	126-129mm
2	120-123mm	130-133mm
2.5	124-127mm	134-137mm
3	128-131mm	138-141mm

Do not assume that if you wear a certain size in another boot style. you will wear the same size Glue-On or Glove. Success of the Easyboot Glove and Easyboot Glue-On are determined by accurate measurements and a snug fit. We have found that measurements are more accurate and easier to take using the metric system.

Easyboot Glue-On (EZ SB-EBGOS)
Sizes 00 thru 3 - $ 21.90 each
(Not a stock item. Normally ships in 7-10 days. )

The following accessories are required
for Easyboot Glue-On application

Larger Image	Vettec Glue Dispensing Gun Used to dispense Vettec glue products. (EZ SB-GUN) - $ 57.60 (each) (Not a stock item. Normally ships in 7-10 days. ) Qty:
Larger Image	Vettec Adhere Glue A fast-setting urethane adhesive designed to bond Easyboot Glue-on boots to the hoof. Sets hard with a superior bond, but maintains the flexibility necessary at the quarters and heels to allow for natural movement of the hoof. One tube per eight Easyboot Glue-On shells (will vary depending on boot size). 180cc tube. Sold individually. (EZ SB-ADHERE) - $ 29.40 (each) (Not a stock item. Normally ships in 7-10 days. ) Qty:
Larger Image	Vettec Sole Guard Adhesive A fast-drying product that adheres Easyboot Glue-on boots to the hoof. It adds sole protection while maintaining hoof flexibility. 30 second set-up time. One tube per eight Easyboot Glue-On shells (will vary depending on boot size). 180cc tube. Sold individually. (EZ SB-SOLEGUARD) - $ 29.40 (each) (Not a stock item. Normally ships in 7-10 days. ) Qty:
Larger Image	Vettec Mixing Tips Required to properly mix and dispense Vettec Adhere and Sole Guard. Sold in packs of 12 (EZ SB-TIPS) - $ 11.00 (pack of 12) (Not a stock item. Normally ships in 7-10 days. ) Qty:

Easyboot Glue-on Details (Click on picture for larger view)

Easyboot Glue-on Size Chart - See Fitting Details

Vettec Glue Dispensing Gun

Vettec Adhere Glue

Vettec Sole Guard Adhesive

Vettec Mixing Tips